Stop the Drafts: Weatherstripping and Caulking an Older Home
Cold air sneaking in around doors and windows is the most noticeable sign of an older house, but it is usually only part of the story. Warm air also escapes through the attic and cold air is pulled in at the basement, a pattern called the stack effect. Sealing those leaks makes rooms more comfortable, lowers heating bills, and can reduce problems like ice dams and frozen pipes.
Finding the leaks
On a cold, windy day, slowly move a lit incense stick or a strip of tissue around window sashes, door edges, outlets on exterior walls and baseboards. Where the smoke or tissue moves, you have a leak. Also look for daylight around doors, cobwebs that move, and dirty streaks in carpet along baseboards, which form where air is being filtered through it.
Doors
- Replace flattened or torn weatherstripping along the jambs. Compression bulb and foam types are common for exterior doors.
- Add or adjust a door sweep or threshold so no daylight shows underneath.
- Adjust the strike plate so the door pulls snugly against the weatherstripping when latched.
- Do not forget the door between an attached garage and the house; it should seal well for safety as well as comfort.
Windows
- On old double-hung windows, V-strip (tension seal) weatherstripping along the sash channels and a seal at the meeting rails make a big difference.
- Make sure sash locks pull the top and bottom sashes together tightly.
- Caulk gaps between interior trim and the wall with a paintable acrylic latex caulk.
- Removable rope caulk or shrink-film window kits are inexpensive seasonal fixes for windows you do not open in winter.
- Storm windows, kept in good repair, add a meaningful layer of protection to old single-pane windows.
Choosing caulk and sealants
- Interior trim and baseboards: paintable acrylic latex caulk.
- Exterior trim, windows and doors: an exterior-grade sealant rated for movement, such as a polyurethane or a high-performance hybrid.
- Gaps larger than about a quarter inch: stuff in foam backer rod first, then caulk over it.
- Larger holes and the rim joist: low-expansion spray foam or rigid foam board sealed at the edges.
- Around chimneys and flues: only fire-rated materials such as sheet metal and high-temperature sealant. Never use regular foam there.
A note on safety and ventilation
As a house gets tighter, combustion appliances like older furnaces, boilers, water heaters and wood stoves need to vent properly. Make sure you have working carbon monoxide alarms on every level and near sleeping areas, and have heating equipment serviced. Bathroom and kitchen exhaust fans should vent outdoors, not into the attic.
Mass Save assessments
Mass Save, the energy efficiency program sponsored by Massachusetts utilities, offers home energy assessments for eligible customers. They can identify air leaks and insulation gaps, and incentives may be available for air sealing and insulation work. Check the Mass Save website for current eligibility and offers before you start a larger project.
Need a hand? See our handyman & repairs services or request a free estimate.
This guide is general information for homeowners, written from our experience maintaining homes in Essex County, MA. Every house is different, so have a qualified professional look at anything structural, electrical, plumbing or safety-related. Browse all guides.
Related guides
Ready to get started?
Tell us about the job and we will get back to you with a straight answer on price and timing. Estimates are free.